1RM.fit1RM.fit
Get Started Free
Exercise Library

Torque Tank Push

Torque Tank Push is an intermediate sled exercise for the primary: chest secondary: shoulders.

Loading a torque-arm sled or tank and driving it forward with both hands trains a pushing pattern against resistance that builds the further you go, instead of a fixed weight. The tank fights back harder the more you push, so effort has to climb through the whole rep.

OthersSled
Torque Tank Push
Primary muscle
Primary: Chest Secondary: Shoulders
Equipment
Sled
Difficulty
Intermediate
Category
Others

How to Do the Torque Tank Push

  1. Set the resistance lever to a low or medium level and stand behind the tank with hands on the upright handles.
  2. Lean forward so the body forms a straight line from head to heels at roughly 45 degrees.
  3. Brace the core and keep the arms extended but not locked, with the shoulders pressed forward into the handles.
  4. Drive the floor away with short, powerful steps, pushing from the balls of the feet.
  5. Keep the hips low and the back flat as the tank picks up speed and the resistance rises.
  6. Push for the planned distance or time, then walk around the tank and rest before the next effort.

Common Mistakes

  • Standing too upright: A tall posture takes the chest and legs out of the push and makes the sled feel heavier. Lean in until the body is a straight line at about 45 degrees.
  • Long slow strides: Overstriding kills momentum and lets the resistance drop. Take quick, short steps and keep the feet under the hips.
  • Bending the arms: Pulling the body toward the handles with bent arms wastes energy. Keep the arms nearly straight and transfer force through the shoulders.

Programming Tips

Place tank pushes at the end of a session as conditioning, or at the start of a lower-body day as a warm-up at low resistance. For conditioning, use 4 to 6 sets of 20 to 30 seconds of hard pushing with 60 to 90 seconds of rest. Because the resistance scales with speed, it works equally well for sprint power and for steady aerobic pushes.

Start on the lowest resistance setting for 20 metres and learn the lean before adding resistance or load plates. Progress by moving up one setting, adding 10 to 20 kg of plates on the frame, or shortening rest. The most common fault is standing up as the legs tire; if the hips rise, stop, reset the lean, and continue.

Common Questions

What muscles does a tank sled push work?

It works the quads, glutes and calves to drive the legs, and the chest, shoulders and triceps to transfer force through the handles. The core braces hard to keep the body straight.

How is a tank push different from a regular sled push?

A regular sled relies on friction and feels heaviest at the start, while a tank uses magnetic resistance that increases with speed. That means the tank gets harder the faster you push and never slides away from you.

How far or how long should I push the tank?

Twenty to 30 seconds of hard effort, or about 15 to 25 metres, repeated for 4 to 6 rounds, is a good conditioning dose. For warm-ups, two easy pushes of 20 metres at low resistance are enough.

Is the tank push bad for your knees?

No, it is one of the most knee-friendly ways to train the legs hard because there is no impact and no eccentric loading. It is often used in rehab for exactly that reason.

Related others exercises

Other ways to train the same muscle, with whatever equipment you have.

Camel Pose
Bodyweight
Couch Stretch
Bodyweight
Heel To Toe Walk
Bodyweight
Hip Thrusts
Bodyweight
Seated Glute Stretch
Bodyweight
Side Split
Bodyweight

See every others exercise →

Programming the Torque Tank Push

Track This Exercise in the App

Log your torque tank push sets in 1RM.fit and watch your estimated 1RM update automatically as you get stronger.

Download on theApp StoreGET IT ONGoogle Play